Arc Furnace Carbon Graphite Electrode for Rod

Arc Furnace Carbon Graphite Electrode for Rod

Graphite electrodes are used in electric furnace steel plants, How to choose a suitable carbon electrode rod? And

What should we pay attention? Mishan Graphite factory will tell you some details as following,

1.According to the capacity of the furnace and the capacity of the transformer,We will select the appropriate type and

diameter of graphite electrode.

2.In the process of loading and unloading graphite electrode rod, To pay more attention to prevent damage and moisture.

The arc furnace carbon electrode exposed to moisture should be used after drying on the electric furnace side. The joint

hole of the Carbon Electrode For Rod and the surface thread of the joint should be well protected during lifting.

3.When connecting graphite electrode, the dust in the joint hole should be blown off with compressed air, the force

used when screwing the joint into the joint hole of the electrode should be stable and even, and the tightening torque

should meet the requirements. When holding the graphite electrode, the controller must avoid the joint area, that

is, clamped above or below the electrode joint hole bottom. Mishan Graphite factory is a professional carbon Graphite Mold

manufacturers, the products are Graphite Plate, Graphite Rod , graphite Graphite Round ,Graphite Ring, Graphite Tube ,

Graphite Ingot mold, Graphite Molds for glass and other Graphite Products,Contact us for more information.